Subsequent Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Install torque support bracket.

1.1 Move torque support bracket -1- into installation position and fit screws -2- and -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Torque support bracket

1.2 Tighten screw -2- > Tightening torque 23 Nm (17 ftlb.)
1.3 Tighten screw -3- > Tightening torque 55 Nm (40.6 ftlb.)

Secure torque support to bracket or strut.
> 103719 REMOVING AND INSTALLING TORQUE SUPPORT
Check the fuel system for leaks.
Install engine cover (design cover).
> WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)
Install strut.
> WM, 408619 REMOVING AND INSTALLING STRUT (A-STRUT)