Installing Fuel Line (High-Pressure, Right)

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

Check fuel line for damage following removal and replace it if necessary.

Coat the thread of the union nuts with Microgleit DF 977S. Observe a drying time of at least 5 minutes before fitting.

Install fuel line -1- .

2.1 Guide in fuel line -1- and fit union nuts -2- and -3- by hand.
2.2 Screw in and tighten screw -4- > Tightening torque 9 Nm (6.6 ftlb.)

2.3 Tighten union nuts -2- and -3- using > V.A.G 1331/6 - open-jawed wrench insert, a/f 17 .

> tightening torque of 10 Nm (7.4 ftlb.)

> Torque angle 60°

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Install fuel line

The remaining installation steps are performed in reverse order.