Preliminary Work

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Remove engine cover.
> WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)

Loosen front apron.

> 631519 REMOVING AND INSTALLING FRONT APRON

2.1 Unscrew screws -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrewing front screw at the top

2.2 Pull safety clips -2- at the left and right off the guide pins using > T10118 - assembly tool .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pulling off safety clips

Unscrew screws -1- using > VAS 6928 - Socket wrench set, 39-piece and remove reinforcement.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing reinforcement