Installing Control Unit For Rear-Differential Lock
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for screws for control unit for rear-differential lock: > Tightening torque 3 Nm (2 ftlb.)
Tightening torque for screws on cover: > Tightening torque 1.5 Nm (1.1 ftlb.)