Technical Values
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Drive shaft protective plate to rear axle housing (right with TPM control unit holder) | Item 2: Hexagon roundhead bolt M6 x 12 | Tightening torque | 8 Nm (5.9 ftlb.) | ||
|
Mounting for protective plate for drive shaft |
|||||
| Final drive to rear axle housing | Item 2: Hexagon-head bolt M12 x 95 | Initial tightening | 60 Nm (44.3 ftlb.) | ||
|
Final drive mounting |
|||||
| Final drive to rear axle housing | Item 2: Hexagon-head bolt M12 x 95 | Final tightening torque angle | + 90° | ||
|
Final drive mounting |
|||||
| Support to rear axle housing | Item 2: Hexagon-head bolt M12 x 40/Always replace bolts after removal! | Initial tightening | 70 Nm (51.6 ftlb.) | ||
|
Mounting for support |
|||||
| Support to rear axle housing | Item 2: Hexagon-head bolt M12 x 40/Always replace bolts after removal! | Final tightening torque angle | + 90° | ||
|
Mounting for support |