Technical Values

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Location	Des...	Type	Basic val...	Toleranc...	Toleranc...
Front lid to front apron (B1)		Gap dimension	3.2 mm	+ 0.8 mm	- 0.6 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Front lid to front apron (B2)	Offset	Gap dimension	- 1 mm - 0.3 mm	+/- 0.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Front lid to wing (K1)		Gap dimension	3 mm	+/- 0.7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Front lid to wing (K2)	Offset	Gap dimension	0 mm	+/- 0.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Nuts securing upper part of lock to front lid	Item 1	Tightening torque	12 Nm (8.9 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Nuts securing upper part of lock to front lid
Nuts securing hinge to front cover	item 2	Tightening torque	20 Nm (15 ftlb.) (14.8 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Nuts securing hinge to front lid