Removing Oil-Pressure Sender

Information 

Install new oil-pressure sender as quickly as possible or close off the opening using a suitable stopper to prevent too much engine oil from leaking out.

1. Have suitable aids ready for collecting escaping engine oil.
2. Remove oil-pressure sender -1-  .
   1. 2.1 Release electric plug connection -Arrow A-  (-Arrow B-  ) and disconnect it.
   2. 2.2 Collect escaping engine oil.
   3. 2.3 Unscrew oil-pressure sender -1-  using > T40363 - socket wrench, a/f 24  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Oil-pressure sender (shown on V6 biturbo)