LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (82 Auxiliary Heating - Wagon -- 971 - PANAMERA (971)) >> WM, 827219 Removing And Installing Circulating Pump (Hybrid) >> Installing Circulating Pump

Installing Circulating Pump

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Tighten screw for circulating pump holder to > Tightening torque 8 Nm (6 ftlb.)  .
    2. 1.2 Tighten screws securing evaporator holder to the body to > Tightening torque 9 Nm (6.5 ftlb.)  .
    3. 1.3 Tighten nuts securing evaporator holder to the body to > Tightening torque 3.5 Nm (2.5 ftlb.)  .
scientia non olet · About LEMON Manuals