Removing Intake-Air Distributor
WARNING: This page is about a different variant/trim than selected.
- Press release buttons -1-
on both sides of the vacuum hose connection pieces and pull off vacuum hoses -2-
.
Pulling off vacuum hoses
- Release and disconnect electric plug connections -1-
on intake-air distributor -2-
.
Releasing and pulling off electric plug connections
- Unclip electric wire harness -1-
from the intake-air distributor -arrows A-
.
Unclipping electric wire harness
- Unclip line bracket -1-
from intake-air distributor -2-
.
Unclipping line bracket
- Remove intake-air distributor -1-
.
- 5.1 Unscrew and remove screws -2 to 8- .
- 5.2 Remove intake-air distributor -1- .
Removing intake-air distributor