Installing Intake-Air Distributor (V6 Turbo)

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following:
Observe tightening sequence -2 to 11- .

Screws -2 to 11- > Tightening torque 9 Nm (6.5 ftlb.) .

Fig 1: Intake-Air Distributor Screws Tightening Sequence

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tightening sequence for intake-air distributor screws