Technical Values
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Side strut to body | Hexagon-head bolt, M8 x 45/always replace bolts following removal | Initial tightening | 20 Nm (15 ftlb.) | ||
| Side strut to body | Hexagon-head bolt, M8 x 45/always replace bolts following removal | Final tightening | + 90° | ||
| Screw-type clamp for pressure hose | Tightening torque | 5.5 Nm (4 ftlb.) | +/- 0.5 Nm (0.4 ftlb.) | ||
| Screw securing reinforcement to module carrier | Item 1 | Tightening torque | 20 Nm (15 ftlb.) | ||
|
Reinforcement on module carrier |
|||||
| Intake scoop to air-cleaner cowl | Screw-type clamp | Tightening torque | 3.5 Nm (2.5 ftlb.) | ||
| Fastening screw for Centre intake-air distributor holder | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Fastening screws securing Centre intake-air distributor to intake-air distributor | Tightening torque | 7 Nm (5 ftlb.) |