Installing Sealing Ring For CARDAN Flange

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

On the new cardan flange sealing ring, fill the space between the dust lip and sealing lip -arrow- with grease.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing sealing ring
Tap new cardan flange sealing ring in as far as it will go using > 9812 - pressure piece .
Tap new dust boot in carefully using > 9332 - pressure piece .
Install new circlip -1- on input flange on all-wheel final drive and coat input flange on all-wheel final drive with a light coating of Anti Seize.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing circlip on input flange on all-wheel final drive