Installing Rear Lid Seal

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

Always replace the seal during removal.

The gap in the seal must be centered at the top.

The vent holes of the seal must be on the outside.

Place rear lid seal -1- in installation position.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Positioning rear lid seal
Press rear lid seal -1- completely onto the body flange.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing rear lid seal
Press on rear lid seal at the rounded areas using > 9513 - puller .