Installing Lower Part Of Rear Lock
WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Position lower part of lock -1- in installation position.
- Tighten screws -2-
slightly with your hand.
Installing lower part of lock
- Position lower part of lock -1- on the old impressions.
- Screw in and tighten screws -2-
> Tightening torque 20 Nm (15 ftlb.)
Adjusting lower part of lock
- Check adjustment of rear lid and re-adjust if necessary.