Removing Heat Shield For Turbocharger
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Heat shields not fitted correctly
- Risk of damage to components due to over-heating
→ Check that the heat shields are screwed on fully.
→ Check that the heat shields overlap fully and without gaps.
→ Do not put pressure (body weight, tools) on heat shields.
→ Store removed components in a safe place.
→ Replace damaged or deformed heat shields and safety clips.
NOTE:
Components not fitted when engine is running or during test drive
- Risk of damage to components due to reduced cooling performance
→ Before starting the engine, make sure that all air-supply components are completely fitted.
→ Only start the engine when the heat shields and design cover are fitted.
→ Only test-drive the vehicle when all underbody panelling, heat shields and the design cover are fitted.
CAUTION:
Hot components
- Risk of burns
→ Let hot components cool down.
→ Wear personal protective gear.
- Unscrew screws -1- and ball pin -2- and remove heat shield -3- .
Heat shield on turbocharger