Removing Trim Panel For Rear Lid

Information 

To prevent damage, use a suitable tool as a support during removal at accessible connection points.

1. Unscrew expanding screws and pull out rubber stop -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Rubber stop

2. Unclip bracket for cord -1-  using a plastic wedge. -arrow- 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bracket for cord

3. Loosen trim panel for rear lid at the bottom. Only on Sport Turismo
   1. 3.1 Open flap in rear lid trim panel at the bottom.
   2. 3.2 Unscrew and remove screws -1-  .

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Trim panel for rear lid, bottom

4. Unclip trim panel for rear lid at the bottom -4-  starting from the rear window. -arrow- 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Trim panel for rear lid, bottom

5. Unclip trim panel for window frame at the centre -5-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Trim panel for window frame, centre

6. Unscrew screw -7-  and unclip trim panel for window frame -6-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Trim panel for window frame