Installing Lower Part Of B-Pillar Trim Panel

Information 

Check whether clips are bent or broken.

Check that all clips are positioned fully and correctly.

Replace missing and damaged clips with new clips.

1. Installation is performed in reverse order. Pay particular attention to the following:
2. Check that the lower ventilation duct is positioned correctly.
3. Screw in and tighten screw securing ventilation duct to B-pillar > Tightening torque 5.6 Nm (4 ftlb.) 

Subsequent work 

1. Install rear inner door sill trim.

   > WM, 680519 REMOVING AND INSTALLING (REAR) INNER DOOR SILL TRIM

2. Install upper part of B-pillar trim panel.

   > 706719 REMOVING AND INSTALLING UPPER PART OF B-PILLAR TRIM PANEL