Function Test
- Move selector lever from position "P" to "D" and from position "D" to "M" and back again several times.
- Check that the parking lock is disengaged.
- 2.1
Switch on the ignition.
- 2.2
Move selector lever to position "P". "P" appears in the instrument cluster.
- 2.3
Actuate the service brake.
- 2.4
Start the engine.
- 2.5
Move selector lever to position "D". "D" appears in the instrument cluster.
- 2.6
Release the service brake. If the vehicle moves forward, the test is complete. Otherwise, all connecting pieces must be checked again.
- Check that the parking lock is engaged (engine running).
- 3.1
Switch on the ignition
- 3.2
Move selector lever to position "P", "P" appears in the instrument cluster.
- 3.3
Actuate the service brake.
- 3.4
Start the engine.
- 3.5
Release the service brake. The vehicle must not move. Otherwise, the entire system must be checked.
- 3.6
Switch off engine.
- Check that the parking lock is engaged (blocking effect).
- 4.1
Switch on the ignition.
- 4.2
Move selector lever to position "P". "P" appears in the instrument cluster.
- 4.3
Move selector lever to position "N". "N" appears in the instrument cluster.
- 4.4
Get another person to help you to push the vehicle for a distance of at least one metre. It must be possible to move the vehicle. Otherwise, the entire system must be checked.
- 4.5
Actuate the service brake.
- 4.6
Move selector lever to position "P". "P" appears in the instrument cluster
- 4.7
Get another person to help you to push the vehicle. The vehicle must not move (a max. movement of 150 mm is acceptable). Otherwise, the entire system must be checked.