Technical Values: Notes
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake line to brake master cylinder (left-hand drive vehicles) | Item 3: Union nut | Tightening torque | 14 Nm (10.5 ftlb.) | ||
|
Brake lines on brake master cylinder |
|||||
| Brake line to outer brake master cylinder (right-hand drive vehicles) | Item 3: Union nut | Tightening torque | 18 Nm (13 ftlb.) | ||
|
Brake lines to brake master cylinder (left-hand drive vehicles) |
|||||
| Brake line to outer hydraulic unit (right-hand drive vehicles) | Item 2: Union nut | Tightening torque | 18 Nm (13 ftlb.) | ||
|
Brake lines to outer hydraulic unit |
|||||
| Brake line to outer hydraulic unit (left-hand drive vehicles) | Item 2: Union nut | Tightening torque | 14 Nm (10.5 ftlb.) | ||
|
Brake lines to outer hydraulic unit |
|||||
| Brake line to inner and rear hydraulic unit | Item 2 and 3: Union nut | Tightening torque | 14 Nm (10.5 ftlb.) | ||
|
Brake lines to inner and rear hydraulic unit |
|||||
| Brake line to hydraulic unit (right-hand drive) | Line: Brake calliper - hydraulic unit | Tightening torque | 14 Nm (10.5 ftlb.) | ||
| Brake line to hydraulic unit (right-hand drive) | Line: Brake master cylinder - hydraulic unit | Tightening torque | 18 Nm (13 ftlb.) | ||
| Pedals to body | Hexagon nut | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Brake booster to pedals | Item 2: bihexagonal head bolt | Tightening torque | 25 Nm (19 ftlb.) | ||
|
Brake booster screws |
|||||
| Brake master cylinder to brake booster | Item 2: Hexagon nut/Always replace nuts following removal | Tightening torque | 49 Nm (36 ftlb.) | ||
|
Brake master cylinder |
|||||
| Brake fluid reservoir to brake master cylinder | Item 2: Screw | Tightening torque | 5 Nm (3.5 ftlb.) | ||
|
Brake fluid reservoir on brake master cylinder |
|||||
| Vacuum pump to engine | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Bleeder screw on front brake calliper | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | ||
| Bleeder screw on rear brake calliper | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Rear brake line on rear brake hose | Item 2 | Tightening torque | 14 Nm | ||
|
Brake hose |
|||||