Removing Transmission Control Unit
WARNING: This page is about a different variant/trim than selected.
NOTIFICATION
Voltage peaks
- Risk of damage to electrical load or to the control unit
- → Remove the ignition key and switch off load before disconnecting or removing load.
- Release electric plug connections -1-
using a thin Phillips screwdriver -2-
(-arrow a-
) and disconnect them -arrows b-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Electric plug connections
- Remove screws -3-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Transmission control unit
- Pull off transmission control unit.