Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Service brake (footbrake) with grey cast iron brake discs (standard brake) with PSM (Porsche Stability Management) as standard | Hydraulic dual-circuit brake system with brake-circuit division on both sides of axle. Vacuum brake booster, internally ventilated brake discs with six-piston aluminium monobloc fixed-calliper brake on front axle and one-piston floating-calliper brake with integrated parking brake on rear axle. | ||||
| PSM | Porsche Stability Management (PSM) as standard with functions ABS, ASR (Traction Control TC+, engine drag torque control MSR, ABD, PTM lock control (longitudinal)). Optional: Levelling system, infinite shock absorber adjustment PASM, electronically regulated limited-slip rear differential PTV+ | ||||
| Front brake discs Ø | Diameter | 360 mm | |||
| Rear brake discs Ø | Diameter | 330 mm | |||
| Brake disc thickness, front | Measured value | 36 mm | |||
| Brake disc thickness, rear | Measured value | 22 mm | |||
| Maximum thickness tolerance of brake disc | Control value | 0.01 mm | |||
| Brake pad area per wheel, front | Pad quality ECE | 191 cm2 | |||
| Brake pad area per wheel, front | Pad quality NAR | 172.6 cm2 | |||
| Brake pad area per wheel, rear | 66.3 cm2 | ||||
| Pad thickness, front | Wear limit 2 mm | Pad quality, ECE | 9.48 mm | ||
| Pad thickness, front | Wear limit 2 mm | Pad quality, NAR | 9.68 mm | ||
| Pad thickness, rear | Wear limit 2 mm | 11.6 mm | |||
| Brake disc wear dimension, front | 34 mm | ||||
| Brake disc wear dimension, rear | 20 mm | ||||
| Lateral runout of brake disc, max. | 0.03 mm | ||||
| Lateral runout of wheel hub, max. | 0.03 mm | ||||
| Lateral runout of brake disc when installed, max. | 0.06 mm |