LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (20 Fuel Supply, Actuator 2.0L -- 95B - MACAN (95B)) >> WM, 203819 Removing And Installing Supply Line (R4) >> Installing Supply Line >> Installing Supply Line - Fuel Tank Section

Installing Supply Line - Fuel Tank Section

WARNING: This page is about a different variant/trim than selected.
  1. Install in reverse order.

    Installing supply line - underbody section 

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screw on line bracket.
      • Tightening torque 9 Nm (6.6 ftlb.) 
    2. 1.2  Tighten screws on the protective plate.
      • Tightening torque 9 Nm (6.6 ftlb.) 
scientia non olet · About LEMON Manuals