LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (21 Exhaust Gas Turbocharging 3.0L -- 95B - MACAN (95B)) >> WM, 219019 - Removing And Installing Pressure Sensor (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.

Only for pressure sensor on centre intake-air distributor: 

  1. Remove engine cover (design cover).

    Only for pressure sensor on left charge-air cooler: 

  1. Remove left front wheel.
  2. Remove front wheel housing liner at the left.
scientia non olet · About LEMON Manuals