LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (21 Exhaust Gas Turbocharging 3.0L -- 95B - MACAN (95B)) >> WM, 219019 - Removing And Installing Pressure Sensor (V6 Turbo) >> Installing Pressure Sensor >> Installing Pressure Sensor (On Left Charge-Air Cooler)

Installing Pressure Sensor (On Left Charge-Air Cooler)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace O-ring.
    2. 1.2  Tighten screw on pressure sensor.
      • Tightening torque 5 Nm (3.5 ftlb.)