Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Control rod adjustment range | with 165 - 175 mbar vacuum | Setpoint value | 8 mm | +/- 1 mm | |
| Control rod adjustment range | with 95 - 105 mbar vacuum | Setpoint value | 3 mm | +/- 1 mm | |
| Nut for vacuum unit | M6 | Tightening torque | 8 Nm (6 ftlb.) | ||
| Lock nut for control rod | Tightening torque | 8 Nm (6 ftlb.) |