Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Fastening nut for turbocharger stud | M8 | Tightening torque | 25 Nm (19 ftlb.) | ||
| Replace | Tightening torque | 20 (15 ftlb.) | 11 Nm | ||
| Screw for active carbon filter line | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Fastening screw for turbocharger lines | M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| V-band clamp securing primary catalytic converter to turbocharger | Tightening torque | 7 Nm (5 ftlb.) |