Subsequent Work
WARNING: This page is about a different variant/trim than selected.
- Install heat shield.
- Install air cleaner housing.
- Teaching the electronic adjuster for turbocharger, using PIWIS Tester:
- 3.1 Connect the PIWIS Tester to the vehicle and switch it on.
- 3.2 Switch on the ignition.
- 3.3 Start diagnostics.
- 3.4 Select "DME" control unit.
- 3.5 Select the "Drive links/checks" tab.
- 3.6 Select the "Drive links to boost pressure regulator" menu item and press F12 to continue.
- 3.7 Press F8 to start.