Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nut securing exhaust manifold to turbocharger | Replace | Tightening torque | 25 Nm (19 ftlb.) | ||
| Fastening screw for coolant return line | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Fastening screw for oil return line for turbocharger | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Fastening screw for oil return line for turbocharger | Tightening torque | 25 Nm (19 ftlb.) | |||
| Fastening screw for heat shield | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Fastening screw securing oil supply line to turbocharger | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Fastening screw securing coolant line to turbocharger | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Fastening screw for support | Tightening torque | 30 Nm (22 ftlb.) | |||
| Screw-type clamp securing moulded hose to turbocharger | Tightening torque | 5.5 Nm (4 ftlb.) |