Subsequent Work

WARNING: This page is about a different variant/trim than selected.

Installing air cleaner housing.
- WM, 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING (R4)
Attaching oxygen sensor upstream of catalytic converter.
- > 246919 - REMOVING AND INSTALLING OXYGEN SENSOR UPSTREAM OF CATALYTIC CONVERTER (R4)
Installing catalytic converter.
- WM, 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER WITHOUT PARTICLE FILTER (R4) or WM, 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER WITH PARTICLE FILTER (R4)
Refill coolant.
- WM, 193817 - DRAINING AND FILLING COOLANT (R4)
If the turbocharger was replaced, reset turbocharger learning values:
- DME -> Routines/drive links -> Reset learning values -> Reset turbocharger learning values