LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (15 Engine - Cylinder Head, Valve Drive 2.0L -- 95B - MACAN (95B)) >> WM, 156356 - Replacing Valve-Stem Seals (R4) >> Replace Valve-Stem Seals >> Replacing Valve-Stem Seals (Cylinder Head Removed)

Replacing Valve-Stem Seals (Cylinder Head Removed)

WARNING: This page is about a different variant/trim than selected.
  1. Pull off valve-stem seal to be replaced using 3364 - valve stem seal puller-1-  .
    G15144951Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Puller

  2. Install new valve-stem seals -4-  .
    1. 2.1  Push assembly sleeve -3-  onto the valve stem -2-  .
    2. 2.2  Lightly oil the sealing lip on the valve-stem seal -4-  .
    3. 2.3  Insert valve-stem seal -4-  into the 3365 - valve stem seal fitting tool-5-  and press it carefully over the assembly sleeve -3-  as far as it will go onto the valve guide -1-  .
    4. 2.4  Remove assembly sleeve -3-  .
    G15144952Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installing valve-stem seal

scientia non olet · About LEMON Manuals