Installing Engine Mounting

WARNING: This page is about a different variant/trim than selected.

Installation is performed in reverse order. Pay particular attention to the following:

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Left engine mount
1. 1.1 Replace and tighten screw securing engine to right engine mounting. Initial tightening 90 Nm
2. 1.2 Replace screw -2- and fit as far as it will go by hand.
3. 1.3 Fit screws -3 and 4- as far as they will go by hand.
4. 1.4 Tighten screw -2- . Initial tightening 90 Nm
5. 1.5 Tighten the screws -3- . Tightening torque 55 Nm (41 ftlb.)
6. 1.6 Tighten the screws -4- . Tightening torque 20 Nm (15 ftlb.)