Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for mounting saddle | Replace | Initial tightening | 65 Nm (48 ftlb.) | ||
| Fastening screw for mounting saddle | Final tightening | + 90° | |||
| Fastening screw for mounting saddle | At the sides, replace | Initial tightening | 20 Nm (15 ftlb.) | ||
| Fastening screws for mounting saddle | At the sides | Final tightening | + 90° |