| Nuts securing holder to right cylinder head cover |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Nuts securing holder for solenoid valves to right cylinder head cover |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Screws for cylinder head cover on right cylinder bank |
Replace following removal. |
Initial tightening |
8 Nm (6 ftlb.) |
|
|
| Screws for cylinder head cover on right cylinder bank |
Replace following removal. |
Torque angle |
+ 90° |
|
|
| Screws for cylinder head cover on left cylinder bank |
Replace following removal. |
Initial tightening |
8 Nm (6 ftlb.) |
|
|
| Screws for cylinder head cover on left cylinder bank |
Replace following removal. |
Torque angle |
+ 90° |
|
|