Subsequent Work

Install sprocket for oil pump.
- Removing and installing oil pump (V6 Turbo)
Install pistons.
- Removing and installing pistons
Install timing chain.
- WM, 154719 REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS (V6 TURBO)
- WM, 158419 REMOVING AND INSTALLING CAMSHAFT ACTUATOR (V6 TURBO)
Install crankcase cover.
- WM, 101419 REMOVING AND INSTALLING FRONT CRANKCASE COVER (V6 TURBO)
Install engine.
- Removing and installing engine
Loosen engine from assembly support.
- WM, 100113 SECURING ENGINE ON ASSEMBLY SUPPORT
Fill in engine oil.
- Draining and filling in engine oil