Preliminary Work

Remove engine.
- Removing and installing engine
Secure engine on assembly support.
- WM, 100113 SECURING ENGINE ON ASSEMBLY SUPPORT
Drain engine oil.
- Draining and filling in engine oil
Remove crankcase cover.
- WM, 101419 REMOVING AND INSTALLING FRONT CRANKCASE COVER (V6 TURBO)
Remove timing chain.
- WM, 158419 REMOVING AND INSTALLING CAMSHAFT ACTUATOR (V6 TURBO)
- WM, 154719 REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS (V6 TURBO)
Remove piston.
- Removing and installing pistons
Remove oil pump sprocket.
- Removing and installing oil pump (V6 Turbo)