LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Turbo >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 Engine - Crank Drive, Pistons 2.9L -- 95B - MACAN (95B) >> WM, 131020 Removing And Installing Pistons (V6 Turbo) >> Technical Values

Technical Values

Location Description Type Basic value Tolerance 1 Tolerance 2
Connecting rod bolts Oil thread and contact surfaces/replace Initial tightening 50 Nm (37 ftlb.)    
Connecting rod bolts Oil thread and contact surfaces/replace Final tightening + 90°    
Screw securing oil windage tray to crankcase M6 x 18 (3 ea.)/rep lace, tighten in diagonally opposite sequence Initial tightening 3 Nm (2 ftlb.)    
Screw securing oil windage tray to crankcase M6 x 18 (3 ea.)/rep lace, tighten in diagonally opposite sequence Final tightening + 90°    
Screw securing oil windage tray to crankcase M6 x 30 (13 ea.)/rep lace, tighten in diagonally opposite sequence Initial tightening 3 Nm (2 ftlb.)    
Screw securing oil windage tray to crankcase M6 x 30 (13 ea.)/rep lace, tighten in diagonally opposite sequence Final tightening + 90°    
Screw securing chain housing cover to oil windage tray M6 x 25 (2 ea.)/rep lace, observe tightening sequence Final tightening + 90°    
Screw securing chain housing cover to oil guide housing M6 x 25 (6 ea.)/rep lace, observe tightening sequence Initial tightening 3 Nm (2 ftlb.)    
scientia non olet · About LEMON Manuals