Installing Torque Support

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Torque support

1. 1.1  Position torque support -1-  . Fit screw -2-  with nut -3-  , as well as screw -4-  .
2. 1.2  Tighten screw -2-  .
   • Initial tightening 15 Nm (11 ftlb.) 
   • Final tightening 180° 
3. 1.3  Tighten screw -4-  .
   • Initial tightening 15 Nm (11 ftlb.) 
   • Final tightening 180°