| Screws on crankcase cover |
Replace following removal. |
Initial tightening |
3 Nm (2 ftlb.) |
|
|
| Screws on crankcase cover, on belt side |
Replace following removal. |
Final tightening |
+ 90° |
|
|
| Screws on crankcase cover in oil guide housing |
Replace following removal. |
Final tightening |
9 Nm |
|
|
| Screw on guide tube for oil dipstick |
Replace O-ring. |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Screws for air-conditioning compressor bracket - |
replace |
Initial tightening |
8 Nm (6 ftlb.) |
|
|
| Screws for change-over valve holder |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|