LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Turbo >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 Engine - Crankcase, Suspension 2.9L -- 95B - MACAN (95B) >> WM, 100119 Removing And Installing Engine (V6 Turbo) >> Subsequent Work

Subsequent Work

  1. Only if removed in order to remove the double clutch transmission: 

    Install power-steering gear.

  2. Secure the locking cable.
  3. Connect ATF cooling line.
  4. Install air-conditioning compressor.
  5. Secure pressure hose to charge-air cooler.
  6. Install front underbody cover.
  7. Install rear cardan shaft.
  8. Only for vehicles with PCCB brakes: 

    Install front PCCB brake discs.

  9. Secure front brake callipers.
  10. Install front wheel housing liners.
  11. Install front wheels.
  12. Install filler neck for washer-fluid reservoir.
  13. Fill in coolant.
  14. Install cowl panel cover.
  15. Install front strut.
  16. Install DME control unit.
  17. Secure pressure hose to throttle housing.
  18. Install torque support.
  19. Install air cleaner housing.
  20. Install engine cover [design cover).
  21. Move bonnet to its normal position.
  22. Connect the battery.
  23. Perform suspension alignment.
scientia non olet · About LEMON Manuals