LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Turbo >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 2.9L -- 95B - MACAN (95B) >> WM, 214119 - Removing And Installing Pressure Pipe (V6 BITURBO) >> Installing Pressure Pipe >> Installing Pressure Pipe (From Charge-Air Cooler To Charge-Air Cooler)

Installing Pressure Pipe (From Charge-Air Cooler To Charge-Air Cooler)

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screws for pressure pipe -2-  .
      • Tightening torque 8 Nm (5.9 ftlb.) 
    2. 1.2  Tighten screw-type clamps on pressure pipe -3-  .
      • Tightening torque 5.5 Nm (4.1 ftlb.) 
    G15151909Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pressure pipe (from charge-air cooler to charge-air cooler)

scientia non olet · About LEMON Manuals