LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Turbo >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 2.9L -- 95B - MACAN (95B) >> WM, 213919 - Removing And Installing Molded Hose (V6 BITURBO) >> Install Molded Hose >> Installing Upper Right Molded Hose

Installing Upper Right Molded Hose

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screw clamps.
      • Tightening torque 5.5 Nm (4 ftlb.) 
scientia non olet · About LEMON Manuals