Technical Values
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Fastening nut for turbocharger stud | M8 | Tightening torque | 25 Nm (19 ftlb.) | ||
| Fit-stud for turbocharger | M8 | Tightening torque | 15 Nm (11 ftlb.) | ||
| Fastening screw for turbocharger lines | M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Fastening screw for tur-bocharger lines | M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Fastening screw for tur-bocharger lines | M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| V-band clamp - Primary catalytic converter to turbocharger | Replacing following removal | Tightening torque | 7 Nm (5.2 ftlb.) |