LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Macan Turbo >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 2.9L -- 95B - MACAN (95B) >> WM, 212419 - Removing And Installing Intake Manifold (V6 BITURBO) >> Installing Intake Manifold >> Installing Right Intake Pipe

Installing Right Intake Pipe

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Replace O-rings.
    2. 1.2  Check seal on right intake pipe for damage and replace it if necessary.
    3. 1.3  Tighten screws on intake manifold -5-  .
      • Tightening torque 9 Nm (6.6 ftlb.) 
    4. 1.4  Tighten screw-type hose clamp -3-  .
      • Tightening torque 4 Nm (3 ftlb.) 
      G15151871Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Right intake pipe

scientia non olet · About LEMON Manuals