Removing Upper Part Of Centre Console Cover

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment. 
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant. 
• Some steps must be carried out automatically. 
• Some of the repair illustrations show only one side of the vehicle. 

1. Remove upper part of centre console cover "-1-".

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Upper part of centre console cover

   1. 1.1  Unclip upper part of centre console cover "-1-" by pulling it upwards "-Arrow-" off the centre console.
   2. 1.2  Release and disconnect electric plug connection "-2-" on 12 V plug socket.
   3. 1.3  Release and disconnect electric plug connection on parking brake controls "-3-".
   4. 1.4  Remove upper part of centre console cover "-1-".