Installing Front Brake Disc
WARNING: This page is about a different variant/trim than selected.
Information
- Replace brake discs once the maximum wear dimension has been reached.
- Re-machining of brake discs is not permitted!
- Check that all parts are in perfect condition (visual inspection) and replace them if necessary.
- Clean the levelling and centring surfaces on the front brake disc and front wheel hub.
- Install front brake disc -1-
.
Front brake disc
- 3.1 Fit front brake disc -1-
and fit and tighten screw -2-
.
> Tightening - torque 10 Nm (7.5 ftlb.)
- 3.1 Fit front brake disc -1-
and fit and tighten screw -2-
.