Removing Spring Strut (Pasm And Conventional)
WARNING: This page is about a different variant/trim than selected.
Information
Recommendation for workshops replacing shock absorbers/spring dampers:
- Dampers can be replaced separately up to a mileage of 30, 000 km or 3 years.
- If the mileage is > 30, 000 km or the components are more than 3 years old, we recommend replacing them in pairs.
Removing spring strut (PASM and conventional)
| 1 | Shock absorber |
| 2 | Boot |
| 3 | Rubber stop |
| 4 | Spring-strut mount |
| 5 | Hexagon nut |
| 6 | Protection cap |
| 7 | Grommet on spring-strut mount |
| 8 | Grommet on connector housing |
| 9 | Connector housing |