Disassembling Double Clutch Transmission
WARNING: This page is about a different variant/trim than selected.
- Remove halfshaft flange.
- Remove drive plate.
- Remove the double clutch.
- Remove sealing ring for double clutch.
> 386955 - Removing and installing sealing ring for double clutch
- Remove drive shaft bearing
> 380919 - Removing and installing drive shaft bearing
- Remove ATF pan.
- Remove transmission control mechanism.
> 387719 - Removing and installing transmission control mechanism
- Remove ATF pump.
- Remove sealing ring for front output shaft.
- Remove wire harness.
> 381819 - Removing and installing wire harness
- Remove sensor module.
> 381919 - Removing and installing sensor module