Preliminary Work
WARNING: This page is about a different variant/trim than selected.
- Remove the engine.
- Loosen both drive shafts at the front on the transmission side.
> 404119 - Removing and installing front drive shaft
- Depending on equipment:
Remove catalytic converter(s) or particle filter.
> 267319 - Removing and installing catalytic converter (V6 Turbo)
> 267419 - Removing and installing particle filter (V6 Turbo)
- Remove line for ATF cooling.
> 386219 - Removing and installing line for ATF cooling (V6 Turbo)