Checking Charge State With Battery Tester
WARNING: This page is about a different variant/trim than selected.
- Check the battery charge state according to the operating instructions for the relevant rapid-start battery charger or battery tester.
Evaluating the test results and subsequent procedure
Open-circuit voltage in volts Charge state in % Evaluation and procedure 12.7 - 12.5 100 - 80 Charge state OK 12.5 - 12.2 80 - 50 Charge state reduced, recharge battery and observe an inactive period of two hours after charging. 12.2 - 11.6 50 - 10 Battery flat; recharge battery and observe an inactive period of two hours after charging. below 11.6 below 10 Battery totally discharged; replace battery.