Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw securing coolant line holder to vacuum pump | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Vacuum pump to engine | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Heat shield on fuel pump | M6 x 16 | Tightening torque | 8 Nm (6 ftlb.) | ||
| Heat shield on fuel pump | M6 | Tightening torque | 8 Nm (6 ftlb.) |